Three-phase high-voltage dry-type transformer
The three-phase high-voltage dry-type transformer is cured by epoxy resin potting process, which is divided into single-phase and three-phase. Its input (primary) voltage is 220V or 380V, and the secondary output high-voltage voltage voltage is generally more than 1000V. It has the advantages of flame retardant, dust-proof, moisture resistance, small partial discharge and good lightning impact resistance. It is widely used in electrical equipment, electrical materials, insulation performance test Dehumidification power supply of high-voltage switchgear, ozone generator, long-distance power transmission, step-up and step-down are used as low-power high-voltage power supply; This series of transformers have the advantages of low loss, small volume, light weight, compact structure, beautiful appearance and convenient use. They can be carefully designed and customized according to customer requirements.
Technical parameter
Number of phases: three phase
Capacity: 5000va ~ 100kVA
Input voltage: three-phase 220V / 380V / 440V / 660V (customized as required)
Output voltage: 1500V / 2KV / 3KV / 4KV / 5kV / 7kv / 10kV / 12kV (customizable)
Frequency: 50 / 60Hz, within 1000Hz as required
Efficiency: ≥ 95%
Insulation grade: F grade, H grade and HC grade are optional (conventional H grade) temperature resistance 180 °
Work efficiency: 95%
Waveform distortion: no additional waveform distortion
Insulation resistance: ≥ 50m Ω
Temperature rise: 60K
Electrical strength: power frequency sinusoidal voltage 3500v for 1 minute without breakdown and flashover
Overload capacity: double the rated current for 1 minute
Executive standard: the product complies with vde0550, iec439, jb5555 and gb226
Ambient temperature: - 20 ℃ ~ + 50 ℃
Humidity: ≤ 95% RH, no condensation
Altitude: < 1000M
Relative humidity: < 90%
Cooling mode: dry self cooling / air cooling / water cooling
Workplace: no corrosive gas and conductive dust
Note: the installation site is free of gas vapor, chemical deposition, dust, dirt, other explosive and corrosive gases and conductive dust that seriously affect transformer insulation
Product quality assurance and service guarantee of the company:
Before leaving the factory, each product is fully inspected in strict accordance with the national standard to ensure that the factory pass rate is 100%, and all products are guaranteed for one year( (except for special customer requirements)