JMB portable lighting safety transformer
BOD ring transformer is a major type of electronic transformer. It has been widely used in household appliances and other electronic equipment with high technical requirements. Its main purpose is as power transformer and isolation transformer. Ring transformer has a complete series abroad. It is widely used in computers, medical equipment, telecommunications, instruments, lighting, home appliance sound, electrical control, humidifier, atomizer, outdoor engineering, security monitoring equipment, etc. it has the advantages of small volume, high efficiency, low temperature rise, small magnetic leakage, easy installation and so on.
Features
1. High efficiency: high quality materials and compact structure are adopted to minimize the distance between iron core and winding, so the efficiency can reach more than 90%;
2. Small magnetic leakage: the magnetic gap of the iron core of the ring transformer is small and the winding is uniform;
3. Low noise and low heat generation: because the ring transformer is made of high-quality and low loss materials, with uniform circular section and continuous winding, the resistance loss and heat generation are very low;
4. Small overall size and light weight. The weight of ring transformer can be reduced by half compared with laminated transformer;
5. It is easy to install the ring transformer. There is only one mounting screw in the center, which is especially easy to quickly install and disassemble in electronic equipment;
Technical parameters
Number of phases: single phase
Capacity: 50VA ~ 5000va
Input voltage: single phase 220V, 380V
Output voltage: 6V, 12V, 15V, 24V, 30V, 36V, 55v, 70V, 110V, 127V, 220V, 380V, etc. (customizable)
Frequency: 50 / 60Hz
Efficiency: ≥ 90%
Insulation grade: F grade, H grade and HC grade are optional (conventional H grade) temperature resistance 180 °
Working efficiency: inductive (isolated)
Waveform distortion: no additional waveform distortion
Insulation resistance: ≥ 50m Ω
Temperature rise: 60K
Electrical strength: power frequency sinusoidal voltage 3000V for 1 minute without breakdown and flashover
Overload capacity: double the rated current for 1 minute
Executive standard: the product complies with vde0550, iec439, jb5555, gb226 and other international and national standards
Ambient temperature: - 20 ℃ ~ + 50 ℃
Humidity: ≤ 95% RH, no condensation
Altitude: < 1000M
Relative humidity: < 90%
Cooling mode: dry self cooling / air cooling
Workplace: no corrosive gas and conductive dust
Design life: more than 20 years
Note: the installation site is free of gas vapor, chemical deposition, dust, dirt, other explosive and corrosive gases and conductive dust that seriously affect transformer insulation
Product model, outline and installation dimensions
规格型号 Model# |
铁芯尺寸(mm) Core dimension |
压盘(mm) |
重量(g) Weight |
||||
高度H |
直径OD |
内径ID |
底盘Base |
压盘 |
螺杆长度Bolt lenght |
||
BOD-50VA |
35 |
82 |
45 |
85×85 |
55 |
50 |
1.8 |
BOD-100VA |
35 |
82 |
45 |
85×85 |
55 |
50 |
2.3 |
BOD-150VA |
35 |
82 |
45 |
85×85 |
55 |
50 |
2.5 |
BOD-200VA |
45 |
95 |
55 |
110×110 |
80 |
65 |
3.9 |
BOD-300VA |
45 |
98 |
53 |
110×110 |
80 |
65 |
4.6 |
BOD-400VA |
50 |
100 |
55 |
110×110 |
80 |
70 |
6.4 |
BOD-500VA |
55 |
105 |
60 |
125×125 |
80 |
75 |
6.4 |
BOD-800VA |
60 |
140 |
70 |
150×150 |
100 |
85 |
12 |
BOD-1000VA |
60 |
150 |
75 |
150×150 |
100 |
85 |
14 |
BOD-1200VA |
65 |
155 |
85 |
150×150 |
100 |
90 |
15 |
BOD-1500VA |
70 |
155 |
85 |
|
120 |
100 |
17 |
BOD-2000VA |
75 |
175 |
90 |
|
120 |
120 |
24 |
BOD-2500VA |
75 |
190 |
90 |
|
120 |
120 |
31 |
BOD-3000VA |
80 |
200 |
100 |
|
120 |
120 |
33 |
BOD-4000VA |
90 |
220 |
120 |
|
130 |
130 |
40 |
BOD-5000VA |
90 |
220 |
120 |
|
135 |
135 |
46 |
Service conditions
1. The ambient temperature is - 5C ~ + 40 ℃
2. The altitude shall not exceed 2000m;
3. The maximum relative humidity of the surrounding air is 90% (when the temperature is + 25C)
4. The power supply voltage waveform is sine wave or similar to sine wave;
5. No steam, chemical deposition, conductive dust, dirt and other explosive and corrosive gases
6. No serious vibration and turbulence;
Ordering instructions
1. Basic model, specification, capacity and quantity of transformer;
2. Primary (input) and secondary (output) voltage of transformer;
3. When there are multiple groups of secondary voltages, the capacity distribution of each output voltage shall be provided;
4. The outline and installation dimensions are for reference only. If the required dimensions need to be changed, they must be explained when ordering.
Note: if the user has special requirements, the company can carefully design and manufacture according to the user's needs.