控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。

High voltage protective capacitor

Back to product >>
Cooperation Consulting >>

Product Details

When the protective capacitor and resistor are connected in series, they form a resistance-capacitance overvoltage absorption device, which can limit the overvoltage when the switch is switched on and off, and protect the electrical equipment. This product can also be used as high-voltage capacitor in other occasions. When it is connected to the ground, it is used to reduce the wavefront steepness and peak value of atmospheric overvoltage, and cooperate with lightning arrester to protect generator, motor and other equipment.

 

1. Rated voltage: Ue=35KV (AC effective value)

2. Rated capacitance: 0.1 μ F

3. Rated frequency: 50Hz

4. Tangent value of dielectric loss angle: tg at 20 ℃ at rated voltage δ Not more than 0.0005.

5. Overvoltage: the capacitor can operate for a long time at 1.1Ue and can withstand the operating overvoltage generated when the first peak value is not more than 2.5Ue due to the opening and closing of the circuit breaker.

6. Overcurrent: The capacitor can operate for a long time at 1.5Ie. This current includes the current caused by steady-state overvoltage, harmonic current and the current increased by capacitance deviation.

1. The altitude of the installation and operation area shall not exceed 1000m; (If there is any revision of altitude, please explain it before ordering.)

2. Ambient air temperature range of installation and operation area: indoor - 40~+45 ℃;

3. Relative humidity of air ≤ 95%;

4. The installation and operation site shall be free of corrosive gas and steam;

5. The operation site is free of conductive or explosive dust and severe mechanical vibration;

6. There should be no large amount of dust and dirt on the surface of capacitor porcelain bushing. If oil leakage is found, it must be removed from operation.

7. Cooling method: the air on the surface of capacitor shell is naturally convection.

1. Capacitance deviation - 5~+10%;

2. Loss tangent tan δ< 0.05%;

3. Capacitance strength of dielectric 2.15 μ, Lasted for 1 min;

4. Other technical requirements are in accordance with the requirements of the national standard.

Related Products

PRODUCTS

Product consulting

Consulting products: *

Name: *

E-mail: *

Contact number: *

WeChat: *

Notes: *

控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。